Rubber Mounts | Anti Vibration Mounts | Anti Vibration Rubber Mounts | Rubber Engine Mounts | Isolation Mounts | Rubber Isolators

AKUSTIK PIPE

AMC-MECANOCAUCHO® Akustik Pipe consist in a double-hole Sylomer part enclosed in a steel housing.

The assembly of this mounting is very simple due to the easily removable Sylomer part and its single fastening hole. The uncovered distance by the housing determines the preload of the Akustik Pipe, allowing the bolt to be tightened until the housing is firmly in contact with the base.

AMC-MECANOCAUCHO® Akustik Pipes are specially suitable for applications where rigid or flexible pipes must be isolated, both for static and dynamic applications.

AT

The AT type mounts can be used to great advantage for the vibration isolation of : engines, piston compressors, presses, electric transformers, mobile units, machines, on concrete buttresses, etc.

UNSPSC Code: 23153130

ATP

Suspension systems where it is deemed necessary to control any Pitching or Rolling movement which could strain external connections.

UNSPSC Codes: 23153130

Bobbin – Annular

Bobbins are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti vibration isolation of machines and different mechanical organs. They are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed either by screws in the ‘’C’’ model or with nuts in the ‘’A” model or a combination of both in the ‘’B” model.

UNSPSC Codes: 23153130

Bobbin – Diabolo, Type A

Bobbins are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti vibration isolation of machines and different mechanical organs. They are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed either by screws in the ‘’C’’ model or with nuts in the ‘’A” model or a combination of both in the ‘’B” model.

UNSPSC Codes: 23153130

Bobbin – Diabolo, Type B

Bobbins are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti vibration isolation of machines and different mechanical organs. They are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed either by screws in the ‘’C’’ model or with nuts in the ‘’A” model or a combination of both in the ‘’B” model.

UNSPSC Codes: 23153130

Bobbin – Diabolo, Type C

Bobbins are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti vibration isolation of machines and different mechanical organs. They are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed either by screws in the ‘’C’’ model or with nuts in the ‘’A” model or a combination of both in the ‘’B” model.

UNSPSC Codes: 23153130

Bobbin – Trapezoid

Bobbins are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti vibration isolation of machines and different mechanical organs. They are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed either by screws in the ‘’C’’ model or with nuts in the ‘’A” model or a combination of both in the ‘’B” model.

UNSPSC Codes: 23153130

Bobbin – Type A

Bobbins are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti vibration isolation of machines and different mechanical organs. They are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed either by screws in the ‘’C’’ model or with nuts in the ‘’A” model or a combination of both in the ‘’B” model.

UNSPSC Codes: 23153130

Bobbin – Type B

Bobbins are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti vibration isolation of machines and different mechanical organs. They are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed either by screws in the ‘’C’’ model or with nuts in the ‘’A” model or a combination of both in the ‘’B” model.

UNSPSC Codes: 23153130

Bobbin – Type C

Bobbins are devices for making elastic anchorings or fixings. They can be used in a wide variety of applications, particularly for elastic suspensions and anti vibration isolation of machines and different mechanical organs. They are made of a block of rubber with two parallel metal parts at the end which enable it to be fixed either by screws in the ‘’C’’ model or with nuts in the ‘’A” model or a combination of both in the ‘’B” model.

UNSPSC Codes: 23153130

BRB

This BRB anti vibration mount is suitable for the isolation of mobile rotating machines which are exposed to axial and radial shocks, dripping oil, diesel or exposure to the weather. It is particularly interesting for applications where a high level of vibration isolation is required.

UNSPSC Codes: 23153130

BRT

BRT anti vibration mounts are anti vibration elements which work the rubber in shear and compression with an optimal ratio of stiffness and horizontal stability. These engine mounts are really applicable as stabilisers of electrical cabinets or racks. Thanks to the robust fail safe architecture it is useful in applications where the box type assembly is submitted to shocks. This mount is suitable for the isolation of mobile rotating machines which are exposed to axial and radial shocks, dripping oil or diesel or exposure to the weather.

UNSPSC Codes: 23153130

BSB

BSB engine anti vibration mounts are anti vibration elements which work the rubber in shear and compression with an optimal ratio of stiffness and horizontal stability. These engine mounts are really applicable when stability is a priority in an anti vibration suspension. In applications where the degree of isolation is the priority we thoroughly recommend the use of BRB captive mount.

UNSPSC Codes: 23153130

Buffer – Cylindrical

The rigid buffers used as ends of stroke or to check moving parts give rise to very high stresses at the time of the impact and therefore to rapid deterioration, accompanied by an often unacceptable noise, particularly when these impacts are repeated periodically. The elastic buffers get rid of these drawbacks completely, as they are soundproofed with rubber. The single buffer is a flat surface of rubber and therefore responds immediately to impact, without over-extending the stroke of the moving organ. The progressive buffer has a conical form in the rubber, and therefore makes contact on a progressive surface, which increases with crushing. The action is more gradual and is particularly good for a considerable absorption of energy, without a prohibitive instant stress.

UNSPSC Codes: 23153130

Buffer – Rectangular 120 X 120

Rigid buffers used as end stops or to limit the stroke of moving parts give rise to high impact stresses to structures often causing visible deterioration .This is normally accompanied by unacceptably high noise levels to the human ear , particularly when these impacts are repeated periodically. Rubber buffers eliminate these drawbacks considerably, as they dampen noise and absorb energy . The simple buffer is a flat surface and therefore responds immediately to impact, without over-extending the stroke of the moving part. The progressive buffer has a conical form and therefore makes contact on a progressive basis , increasing deflection with increasing load. This action provides gradual arrest of moving parts, absorbing considerable energy, prohibiting instant high impact stresses.

UNSPSC Codes: 23153130

Buffer, Diabolo – Type C

The rigid buffers used as ends of stroke or to check moving parts give rise to very high stresses at the time of the impact and therefore to rapid deterioration, accompanied by an often unacceptable noise, particularly when these impacts are repeated periodically. The elastic buffers get rid of these drawbacks completely, as they are soundproofed with rubber. The single buffer is a flat surface of rubber and therefore responds immediately to impact, without over-extending the stroke of the moving organ. The progressive buffer has a conical form in the rubber, and therefore makes contact on a progressive surface, which increases with crushing. The action is more gradual and is particularly good for a considerable absorption of energy, without a prohibitive instant stress.

UNSPSC Codes: 23153130

Buffer, Diabolo – Type D

Rigid buffers used as end stops or to limit the stroke of moving parts give rise to high impact stresses to structures often causing visible deterioration. This is normally accompanied by unacceptably high noise levels to the human ear, particularly when these impacts are repeated periodically. Rubber buffers eliminate these drawbacks considerably, as they dampen sound and absorb energy . The simple buffer has a flat surface of rubber and therefore responds immediately to impact, without over-extending the stroke of the moving part. The progressive buffer has a conical form and therefore makes contact on a progressive basis, increased deflection with increased load. This action is much more gradual and is particularly good for a considerable absorption of energy, without causing instant stress.

UNSPSC Codes: 23153130

Buffer, Progressive – Type C

Rigid buffers used as end stops or to limit the stroke of moving parts give rise to high impact stresses to structures often causing visible deterioration. This is normally accompanied by unacceptably high noise levels to the human ear particularly when these impacts are repeated periodically. Rubber buffers eliminate these drawbacks considerably, as they dampen noise and absorb energy. The simple buffer has a flat surface and therefore responds immediately to impact, without over-extending the stroke of the moving part. The progressive buffer has a conical form and therefore makes contact on a progressive basis , increasing deflection with increasing load. This action provides gradual arrest is of moving parts absorbing considerable energy, prohibiting instant high impact stress.

UNSPSC Codes: 23153130

Buffer, Progressive – Type D

Rigid buffers used as end stops or to limit the stroke of moving parts give rise to high impact stresses to structures often causing visible deterioration. This is normally accompanied by unacceptably high noise levels to the human ear particularly when these impacts are repeated periodically. Rubber buffers eliminate these drawbacks considerably, as they dampen noise and absorb energy . The simple buffer has a flat surface and therefore responds immediately to impact, without over-extending the stroke of the moving part. The progressive buffer has a conical form and therefore makes contact on a progressive basis, increasing deflection with increasing load. This action provides gradual arrest of moving parts absorbing considerable energy, prohibiting instant high impact stress.

UNSPSC Codes: 23153130

Buffer, Simple – Type D

Rigid buffers used as end stops or to limit the stroke of moving parts give rise to high impact stresses to structures often causing visible deterioration. This is normally accompanied by unacceptably high noise levels to the human ear , particularly when these impacts are repeated periodically. Rubber buffers eliminate these drawbacks considerably, as they dampen noise and absorb energy . The simple buffer is a flat surface and therefore responds immediately to impact, without over-extending the stroke of the moving part. The progressive buffer has a conical form and therefore makes contact on a progressive basis , increasing deflection with increasing load. This action provides gradual arrest of moving parts, absorbing considerable energy, prohibiting instant high impact stresses.

UNSPSC Codes: 23153130

Buffer, Simple – Type E

Rigid buffers used as end stops or to limit the stroke of moving parts give rise to high impact stresses to structures often causing visible deterioration .This is normally accompanied by unacceptably high noise levels to the human ear , particularly when these impacts are repeated periodically. Rubber buffers eliminate these drawbacks considerably, as they dampen noise and absorb energy . The simple buffer is a flat surface and therefore responds immediately to impact, without over-extending the stroke of the moving part. The progressive buffer has a conical form and therefore makes contact on a progressive basis , increasing deflection with increasing load. This action provides gradual arrest of moving parts, absorbing considerable energy, prohibiting instant high impact stresses.

UNSPSC Codes: 23153130

Bushings

Bushings have several applications, such as vehicle cabins, motors, etc.

UNSPSC Codes: 23153130

Cabin Mount

AMC-MECANOCAUCHO® Cab Mount is composed of two main metal parts. Both metal parts are bonded to a highly resilient rubber for optimum vibration isolation.

Cab mount is suitable for vibration isolation of cabins and other machines, like tractors or ATVs.

UNSPSC Codes: 23153130

CB

AMC-MECANOCAUCHO® type CB anti vibration mounts are installed in pairs. Installation is simplified as both mounts are fixed with one through bolt and washers at each end of the installed mount.

The CB mount is provided with a built in radial wear plate that prevents the elastomeric element coming into contact with the sharp edges of laser cut holes in support frames or structures that can cause friction in traditionally used semi-bonded mounts . This wear plate reduces the need to machine radius or chamfer holes , reducing cost. The specific design permits high dynamic loading whilst limiting movement due to their multi-axial snubbing.

UNSPSC Codes: 23153130

Cone – Solid

The solid cones work the rubber in shear compression. They are composed of two parallel conical metal parts. They have two washers, one as a buffer and the other for centering.

UNSPSC Codes: 23153130

Cone with Cutout

The cutouts on the rubber section offer different horizontal/vertical stiffness ratios. This feature is specially interesting for those applications where a lower stiffness is required in one of the axes. Our Technical Department can provide you with the elastical constants for each axis and can also recommend the optimal position of the cutouts for best results.

UNSPSC Codes: 23153130

Cones with Fixation flange

Cones with fixation flanges have been designed specially for use in engines and auxiliary machinery for static and mobile applications in all kinds of vehicles.

UNSPSC Codes: 23153130

Coupling, Elastic – D.P. A4 type

UNSPSC Codes: 23153130

Coupling, Elastic – D.P. type

UNSPSC Codes: 23153130

Coupling, Elastic – DV

UNSPSC Codes: 23153130

Coupling, Elastic – Flector

UNSPSC Codes: 23153130

DRD

The DRD anti vibration mounts have low axial and radial stiffness rates. Their design makes them ideal for those machines that produce vibrations in 3 axes. The design of these mounts is similar to the DSD mounts, but the rubber section has a higher profile. This feature makes them lower stiffness rate mounts compared to the DSD types. DRD mounts are particularly useful for those applications where much improved vibration isolation is required .

UNSPSC Codes: 23153130

DSD

DSD anti vibration mounts design provides excellent radial and axial flexibility making them most suitable for the suspension of machines where isolation of both vertical and horizontal vibration components occur. DSD mounts comprise of two flat metal parts. The top metal part is circular with either a tapped central boss or an internal welded nut for attaching the mount to the machine frame .The lower metal part has an oval shape with two holes to allow fixing to the support structure of the machine .

UNSPSC Codes: 23153130

DSD + Bell

DSD anti vibration mounts design provides excellent radial and axial flexibility making them most suitable for the suspension of machines where isolation of both vertical and horizontal vibration components occur. DSD mounts comprise of two flat metal parts. The top metal part is circular with either a tapped central boss or an internal welded nut for attaching the mount to the machine frame .The lower metal part has an oval shape with two holes to allow fixing to the support structure of the machine .

UNSPSC Codes: 23153130

Eccentric Bushing

In eccentric bushings, the center points of the inner and outer cylinders are not the same. As a result it is more flexible in the direction of the main load and it keeps the same control in the other direction.

UNSPSC Codes: 23153130

Elastomeric Spring

The AMC-MECANOCAUCHO® type Elastomeric Spring anti vibration mounts are ideal for those applications where high vibration isolation is required. Its specific design allows this mount to have high deflection . This feature is particularly useful on those applications where vibration in the vertical sense is predominant.

UNSPSC Codes: 23153130

FZ Sylomer

The AMC-MECANOCAUCHO® FZ mounts are composed by two metal parts surrounded by a high resiliency Sylomer® poliurethane compound that offers a high isolation capacity with a small static deformation in all MEDIUM-HIGH frequency range. They have also an interlocking metal component that provides a fail-safe protection. The Sylomer® polyurethane compound is oil resistant and the temperature range of the FZ mounts is -30ºC +70ºC.

UNSPSC Codes: 23153130

FZM Wire Mesh Mount

The AMC-MECANOCAUCHO® type FZM mounts are ideal for mobile applications where high temperatures up to 300º C are present.

Its specific design allows very similar traction and compression stiffness rates. This feature is particularly useful on those applications where vibration in the vertical sense is predominant. The metal parts are robust and incorporate a fail-safe device in order to resist traction forces.

UNSPSC Codes: 23153130

Heavy Load Mount – Anti Skid

Anti-Skid, heavy load pad mounts for heavy loads.

UNSPSC Codes: 23153130

Heavy Load Mount – Type B

Type B mounts for heavy loads.

UNSPSC Codes: 23153130

Heavy Load Mount – Type G.C

Type G.C mounts for heavy loads.

UNSPSC Codes: 23153130

Heavy Load Mount – Type P

Type P mounts for heavy loads.

UNSPSC Codes: 23153130

Heavy Load Mount – Type P Anti-Skid

Type P anti-skid mounts for heavy loads.

UNSPSC Codes: 23153130

Heavy Load Mount – Type S

Type S mounts for heavy loads.

UNSPSC Codes: 23153130

Height Adjuster – Hi Sec

This height adjusting system is Zinc plated and chromate according to DIN 50691/ISO 2081 to protect against the corrosion.

UNSPSC Codes: 23153130

Height Adjuster – Shim

These height adjusting shims are used for the levelling the marine engine. They are composed of an anti corrosive steel plate in order to resist to the marine environments.

UNSPSC Codes: 23153130

Height Adjuster – Standard

This height adjusting system is Zinc plated and chromate according to DIN 50691/ISO 2081 to protect against the corrosion.

UNSPSC Codes: 23153130

Hydraulic Cone Mount

The HYDRAULIC CONE MOUNT is a combination of a spring component and a hydraulic shock absorber in the shape of a cone. With this both components can be tuned to each other. For good vibration insulation you need a low dampening coefficient but for movement control you need a high dampening coefficient. The HYDRAULIC CONE MOUNTS combine these two completely different requirements in one single bearing.

This gives you the opportunity to adapt the dynamic properties of the insulator to the individual requirements of the application.

UNSPSC Codes: 23153130

Hydraulic Mount

AMC-MECANOCAUCHO® hydro mounts combine a spring and a hydraulic damper in a single compact unit that allows tuning of the spring and damper independently.

This provides flexibility in matching the dynamic characteristics of the isolator to the requirements of the application . The internal design of the mount is a new system that bonds the metal parts to the rubber effectively to eliminate leakage of the damping fluid when the mount is subjected to high magnitude shock inputs. For good isolation , low damping is required . For motion control high damping is required .

Levelling – H type NGI

Hygienic design, rounded metal parts that allow easy cleaning. The rubber compound is approved for food industry by the FDA.

Maximum inclination 10 degrees.

UNSPSC Codes: 23153130

Levelling – JT

JT-type mounts are used in cases where light or heavy machines are not fixed to the floor or ground. The height adjustment system can be used to adjust the machines to the required level, thus insulating areas nearby from vibrations and reducing noise. The type JT comes with a tilting system accommodating uneven surfaces.

UNSPSC Codes: 23153130

Levelling – M type NGI

The NGI anti-vibration mounts are made of stainless steel.

Hygienical design, rounded metal parts that allow easy cleaning.

The rubber compound is approved for food industry by the FDA.

UNSPSC Codes: 23153130

Levelling – NF

NF-type mounts are used in cases where light or heavy machines are not fixed to the floor or ground. The height adjustment system can be used to adjust the machines to the required level, thus insulating areas nearby from vibrations and reducing noise. The type NF comes with a tilting system accommodating uneven surfaces. The elastomer used is a mixture of oil-resistant synthetic Nitrile Butadyene Rubber (NBR).

UNSPSC Codes: 23153130

Levelling – NFR

NF-type mounts are used in cases where light or heavy machines are not fixed to the floor or ground. The height adjustment system can be used to adjust the machines to the required level, thus insulating areas nearby from vibrations and reducing noise. The type NF comes with a tilting system accommodating uneven surfaces. The elastomer used is a mixture of oil-resistant synthetic Nitrile Butadyene Rubber (NBR).

UNSPSC Codes: 23153130

Levelling – PM Sylomer

PM Sylomer Polyurethane supports for heavy loads. In order to support these heavy weights we use a special mixture of high density polyurethane Sylomer® which

offers a better resistance than the synthetic rubbers for oils, solvents, acids and bases.

UNSPSC Codes: 23153130

Levelling – SM

SM -type anti vibration mounts are used in cases where light or heavy machines are not fixed to the floor or ground. The height adjustment system can be used to adjust the machines to the required level, thus insulating areas nearby from vibrations and reducing noise. The AMC-Mecanocaucho® type SV comes with a tilting system accommodating uneven surfaces.

UNSPSC Codes: 23153130

Levelling – SV

SV-type anti vibration mounts are used in cases where light or heavy machines are not fixed to the floor or ground. The height adjustment system can be used to adjust the machines to the required level, thus insulating areas nearby from vibrations and reducing noise. The AMC-Mecanocaucho® type SV comes with a tilting system accommodating uneven surfaces.

UNSPSC Codes: 23153130

Levelling – SV – Low

SVLow -type anti vibration mounts are used in cases where light or heavy machines are not fixed to the floor or ground. The height adjustment system can be used to adjust the machines to the required level, thus insulating areas nearby from vibrations and reducing noise. The AMC-Mecanocaucho® type SV comes with a tilting system accommodating uneven surfaces.

UNSPSC Codes: 23153130

Levelling – SX

Levelling SX-type mounts are used in cases where light or heavy machines are not fixed to the floor or ground. The height adjustment system can be used to adjust the machines to the required level, thus insulating areas nearby from vibrations and reducing noise. The type SX comes with a tilting system accommodating uneven surfaces.

UNSPSC Codes: 23153130

Marine Exhaust – SFC

The SFC Marine Exhaust mounts are designed to suspend exhaust ducts in Marine applications.

UNSPSC Codes: 23153130

Marine Exhaust – SFT

The SFT Marine Exhaust mounts are designed to suspend exhaust ducts in Marine applications.

UNSPSC Codes: 23153130

Marine Exhaust – ST

The ST Marine Exhaust mounts are designed to suspend exhaust ducts in Marine applications.

UNSPSC Codes: 23153130

Marine Mount

Marine Mounts are also ideal for mobile applications thanks to their rugged architecture.

Their special design offers multi-axial stiffnesses values , high vertical elasticity,increased longitudinal stiffness and optimal lateral stiffness for improved vibration isolation on that axis.

UNSPSC Codes: 23153130

Marine Mount Type XD

The Marine Type XD mounts are ideal for mobile applications where a higher degree of isolation is required.

Its specific design allows lower vertical and radial stiffness rates. This feature is particularly useful on those applications where a high vibration isolation rate is required even if the machine runs at low idle speeds. The metal parts are robust and incorporate a fail-safe device in order to resist traction forces.

UNSPSC Codes: 23153130

MD

MD-type anti vibration mounts have a similar construction to the BSB and BRB ranges. The advantage of this mount is that it is manufactured in a high-damping rubber compound.

Its special compound mix affords it a high degree of anti vibration isolation and yet offers great stability to suspended equipment .

UNSPSC Codes: 23153130

NP mount

The NP anti vibration mounts are composed of a metallic flange and a bush that are bondend to a high resilient rubber compound.

The NP anti vibration mounts can be fitted with overload/rebound washers. This allows fail-safe installations. For this purpose we recommend using washer Ref. AMC: 608074 that has the following dimensions :76×16.5x5mm.

The flange comes with four fixing holes and the inner bush allows upto 120 N/mm tightening torque.

UNSPSC Codes: 23153130

Rubber Block – Type C

There are different mats, in different sizes, rubber grades and hardness. The most classic use is for damping high frequency vibrations without the need for anchoring machinery to the floor . The user cuts them to the relevant size and can apply them to the base of the machine using an adhesive, or simply placing them under the base of the machine as required. In cases where contact with oils is foreseen, this should be indicated on the order. The mat will be suitably elastic or anti-skid, depending on the different models.

UNSPSC Codes: 23153130

Rubber Block – Type T

There is a variety of mats available in different sizes, rubber grades and hardness. The most classic use is for damping high frequency vibrations without the need for anchoring machinery to the floor . The user cuts them to the relevant size and can apply them to the base of the machine using an adhesive, or simply placing them under the base of the machine as required. In cases where contact with oils is foreseen, this should be indicated on the order. The mat will be suitably elastic or anti-skid, depending on the different models.

UNSPSC Codes: 23153130

Rubber Blocks – Mecanocaucho Blocks

These are square anti vibration mounts which are ideal for installation without the need of any type of attachment or floor anchoring.

UNSPSC Codes: 23153130

Rubber Mats – 300 x 300

There is a variety of mats available in different sizes, rubber grades and hardnesses. The most classic use is for damping high frequency vibrations without the need for anchoring machinery to the floor . The user cuts them to the relevant size and can apply them to the base of the machine using an adhesive, or simply placing them under the base of the machine as required . In cases where contact with oils is foreseen, this should be indicated on the order. The mats can be suitably elastic or anti-skid, depending on the different models.

UNSPSC Codes: 23153130

Rubber Mats – 400 x 400

There is a variety of mats available in different sizes, rubber grades and hardness. The most classic use is for damping high frequency vibrations without the need for anchoring machinery to the floor. The user cuts them to the relevant size and can apply them to the base of the machine using an adhesive, or simply placing them under the base of the machine as required . In cases where contact with oils is foreseen, this should be indicated on the order. The mats can be suitably elastic or anti-skid, depending on the different models.

UNSPSC Codes: 23153130

SCB

SCB anti vibration mounts are elements that work on the basis of compression loading . Due to their design and assembly they provide an anti-rebound effect, thus providing Fail Safe conditions on assembly.

UNSPSC Codes: 23153130

SCBR

The SCBR elastic mounts are elements that work on the basis of compression since thanks to their design and assembly they provide an anti-rebound effect, thus permitting safety assemblies.

Moreover it contains a metallic part, that avoids a premature wear by friction between the rubber and the housing of the mount.

UNSPSC Codes: 23153130

SCH

SCH type anti vibration mounts are made of two moulded parts . One of circular fully moulded rubber, and one circular part which is fully bonded to a centre tube which acts as a guide for the machine anchoring bolt. They are installed pre-compressed on the actual machine frame, whose thickness “E” determines the degree of pre-compression of the assembly.

UNSPSC Codes: 23153130

SCHR

SCHR type mounts are made of two parts of rubber, one of which bears an inside metal bushing which acts as a guide through the machine anchoring screw. It is installed pre-compressed on the actual machine frame, whose thickness “T” determines the degree of pre-compression.

Moreover it contains a metallic part, that avoids a premature wear by friction between the rubber and the housing of the mount.

UNSPSC Codes: 23153130

SH

Each anti vibration mount consists of two heavy duty , square , outer metal plates fully bonded to circular profiled rubber layers separated by interleaf metal plates.There are four drilled holes in each square outer plate for attachment to the unit being suspended and to the chassis . The AMC-MECANOCAUCHO® type SH anti vibration mounts provide high static and shock load capacities in compression with minimum deflection whilst also maintaining a low shear stiffness rate .

UNSPSC Codes: 23153130

SN Mount

It is a support used in multiple applications, but primarily in marine engines whose excitation frequency is less than or close to 1000 rev/min.

UNSPSC Codes: 23153130

SPS

AMC-MECANOCAUCHO® SPS type anti vibration mounts are comprised of two pressed metal parts, a cup shaped Top Cap and a pressed steel inverted cup shaped base into which two moulded rubber sections are assembled and then secured by means of swaging with a threaded centre insert to complete the assembly.

UNSPSC Codes: 23153130

TF

The AMC-Mecanocaucho® TF type anti vibration mounts are made of two moulded parts . One of circular fully moulded rubber, and one circular part which is fully bonded to a centre tube which acts as a guide for the machine anchoring bolt. They are installed pre-compressed on the actual machine frame, whose thickness “E” determines the degree of pre-compression of the assembly.

UNSPSC Codes: 23153130

TFS

The AMC-Mecanocaucho® TFS type anti vibration mounts are made of two moulded parts . One of circular fully moulded rubber, and one circular part which is fully bonded to a centre tube which acts as a guide for the machine anchoring bolt. They are installed pre-compressed on the actual machine frame, whose thickness “E” determines the degree of pre-compression of the assembly.

UNSPSC Codes: 23153130

Transformer Mount

TRANSFORMER MOUNT combines a spring and a TRANSFORMER MOUNT damper in a single compact unit. This mount is particularly useful for transformer where isolation is needed. The internal architecture of the mount is composed of a system that bonds the rubber to both metal parts.

UNSPSC Codes: 23153130

V-Shaped Generator Mount

The V-Shaped Generator mounts render it possible to make installations which are more flexible than ones that can normally be made with cylindrical or Bobbin mounts. This makes it possible to achieve lower system frequencies and consequently improved vibration isolation.

UNSPSC Codes: 23153130

V-Shaped Marine

The V-Marine Mount shape design provides high deflections for relatively low loads. This means that the natural frequency is low and ideal for engines which frequently work at idle speed. It has different stiffness rates in the Vertical , Horizontal and Lateral axes which permits adjustments to the system modes for optimal isolation and stability.

UNSPSC Codes: 23153130

VD

The type VD Mount shape provides high deflections for relatively low loads. This means that the natural frequency is low and ideal for engines which frequently run at idle speed. It has three different stiffness rates in the Vertical , Lateral and Longitudonal axes which permits adjustment of stiffness modes for optimal isolation and stability .They can be installed at specific angles to provide adjustment of the suspension system . Please contact our Technical Department for further details.

UNSPSC Codes: 23153130

Wire Rope Mount

Wire Rope Mounts, due to their low stiffness, are specially suitable for applications where small static loads are involved and high isolation level is required.

UNSPSC Codes: 23153130