Cone with Cutout

The cutouts on the rubber section offer different horizontal/vertical stiffness ratios. This feature is specially interesting for those applications where a lower stiffness is required in one of the axes. Our Technical Department can provide you with the elastical constants for each axis and can also recommend the optimal position of the cutouts for best results.

UNSPSC Codes: 23153130

Category:

Description

The Cone mounts are safe and stable elements. They do not allow the suspended elements to tilt, whilst being flexible enough to avoid the transmission of noise and vibration through the support structure.

They are supplied complete with bump stop and centering washers. This renders deflection above the limits of the Mecanocaucho® Cones impossible, even at extreme loads.

The washers protect the natural rubber (which is highly elastic and highly resistant) from ozone and ageing, as well as from metal knocks and dripping oil. The characteristic deflection curves of the AMC-Mecanocaucho® Cone mounts with centering washer are quite linear, increasing progressively as the load increases. Thanks to this they can safely dampen overloads of up to three times the maximum admissible load.

cutout-cone-drawings

Type

Weight(gr)

Load (kg)

Shore

Code

00

126

25

45 Sh

137007

50

60 Sh

137008

75

70 Sh

137009

10

406

75

45 Sh

137001

140

60 Sh

137002

210

70 Sh

137003

12

407

80

45 Sh

137914

120

55 Sh

137916

200

70 Sh

137918

20

554

120

45 Sh

137031

200

60 Sh

137034

330

70 Sh

137039

30

1167

140

40 Sh

137041

190

50 Sh

137043

300

60 Sh

137042

370

70 Sh

137044

35

1328

200

45 Sh

137065

450

60 Sh

137067

760

70 Sh

137068

38

1438

300

40 Sh

137961

400

50 Sh

137962

650

60 Sh

137963

120 NP

6890

440

45 Sh

137871

720

55 Sh

137872

APPLICATIONS

The cutouts on the rubber section offer different horizontal/vertical stiffness ratios. This feature is specially interesting for those applications where a lower stiffness is required in one of the axes. Our Technical Department can provide you with the elastical constants for each axis and can also recommend the optimal position of the cutouts for best results.

ELASTICAL PROPERTIES

CONE WITH CUTOUTS

 

Data Sheet