TF

The AMC-Mecanocaucho® TF type anti vibration mounts are made of two moulded parts . One of circular fully moulded rubber, and one circular part which is fully bonded to a centre tube which acts as a guide for the machine anchoring bolt. They are installed pre-compressed on the actual machine frame, whose thickness “E” determines the degree of pre-compression of the assembly.

UNSPSC Codes: 23153130

Category:

Description

 

TF-mount-drawing

Type

A(mm)

B(mm)

C(mm)

D(mm)

E(mm)

Q(mm)

T(mm)

Weight(gr)

WASHER

Shore

Max. Load(kg)

Code

TF 55

56,5

39,4

16,2

16

20

40

10

82

611056

45

80

138061

60

175

138063

TF 100

100

56

24

30,5

40

56

25

500

606484

40 Sh

190

137365

50 Sh

280

137366

60 Sh

390

137363

70 Sh

800

137364

TF 105

105

75

16

29

38

75

20

580

606481

40 Sh

160

137381

50 Sh

200

137382

60 Sh

275

137383

70 Sh

360

137384

arandela_scb

TF Anti vibration washers to suit the entire range of TF Mounts. These washers should be used if the rubber surface is not covered with the contact surface.

Washers are matched to their respective TF Mount size.

Type

Weight(gr)

Øext(mm)

Øint(mm)

THICKNESS(mm)

Code

TF 55 Washer

48

54

17

3

611056

TF 100 Washer

373

110

24,5

5

606484

TF 105 Washer

325

105

18

5

606481

TECHNICAL CHARACTERISTICS

This antivibration mount is ideal for applications with major dynamic loadings such as : Off Road Construction vehicles for engines , gearboxes , Operator Cabins where movement control is necessary. It also offers optimal stability, as well as good attenuation of impacts and high frequency vibrations.

APPLICATIONS

  • Vehicle cabins
  • Public works and agricultural vehicles, etc.

OPERATION AND ASSEMBLY

TF Anti vibration mounts

The TF mounts should be assembled according to the following installation instructions. There are two possible configurations, see assembly 1 and assembly 2, for which the recommendations given in the following chart must be observed. They can be installed in plates of different thicknesses according to the Tmx and Tmin values given in the Table provided . The load vs deformation curves will vary according to the plate thickness in which the mount will be installed.

Washers should be used, if the rubber surface is not covered with the contact surface.

ELASTICAL PROPERTIES

TF Anti vibration mounts
 

Data Sheet 

Related products