BRT

BRT anti vibration mounts are anti vibration elements which work the rubber in shear and compression with an optimal ratio of stiffness and horizontal stability. These engine mounts are really applicable as stabilisers of electrical cabinets or racks. Thanks to the robust fail safe architecture it is useful in applications where the box type assembly is submitted to shocks. This mount is suitable for the isolation of mobile rotating machines which are exposed to axial and radial shocks, dripping oil or diesel or exposure to the weather.

UNSPSC Codes: 23153130

Description

BRT Antivibration Mount

BRT-drawing

TypeWeight(gr)ShoreStatic Load max. daNDynamic Load max. daNMCode
BRT 702454550150M-6135805
M-8135806
M-10135807

TECHNICAL CHARACTERISTICS

– The top metal hood protects the rubber from the Ozone, UV rays, diesel or oils which may cause major damage to the rubber.

– The metal parts have a suitable anti-corrosive treatment for outdoor applications. RoHs compliant.

– They have an interlocking metal component that provides a fail-safe protection for mobile applications. This device limits vertical movement when the mounting is submitted to shock inputs.

– The mounts are clearly identified, as the base-plates are engraved with the type and hardness, which makes it possible to easily recognise the part even after several years of use.

– The hood has a cross stamped on the top, which enhances its stiffness on mobile applications and also improves the evacuation of oils or liquids that splash onto it.

APPLICATIONS

This mount is suitable for mobile boxes or racks that require greater control of movement due to axial and radial shock inputs providing reasonable values of vibration and noise attenuation, such as:

– Electrical cabinets, Pumps, Marine-Land auxiliary units, Industrial Vehicles, Compressors, Ventilators…

This mount is suitable for the isolation of mobile rotating machines which are exposed to axial and radial shocks, dripping oil or diesel or exposure to the weather.

OPERATION AND ASSEMBLY

BRT anti vibration mounts

RECOMMENDATIONS FOR HOOD MOUNTS

The hood mounts should be be installed between two parallel and perfectly flat surfaces. Mounts operating tilted or twisted do not work properly. This may be due to incorrect alignment, tolerances in the building of the chassis or over-tightened torque during the installation of the Antivibration mounts.

This applies to our marine-type, BSB, BRB or Mecanodamp mounts.

ELASTICAL PROPERTIES

BRT anti vibration mounts

Data Sheet