10 AMC ANTI-SEISMIC

10 AMC ANTI-SEISMIC

 

 

The Vibrabsorber Antiseismic spring mounts are failsafe anti vibration mounts that are capable to withstand traction and compression dynamic forces offering a low Stiffness for a range of loads between 300 to 8000Kg. Thanks to its reinforced metal parts, the 10 amc Antiseismic mounts can withstand to shocks produced by seismic events.

The AMC-MECANOCAUCHO® type 10 AMC antiseismic mounts are ideal for stationary applications where high isolation degree is required to low disturbing frequencies (800 to 1500 rpm).

UNSPSC Codes: 23153130

Technical Characteristics

The design of these anti vibration mounts is composed of interlocking metal parts where a rubber buffer is placed in order to avoid metal to metal contact when high shear loads occur. This feature allows to provide lateral stability to the suspended element. These lateral metal parts have been calculated to withstand to lateral high forces that may occur in seismic events, allowing the anti vibration mount to resist without rupture. These mounts can be supplied with a Sylomer layer under the below metal part. This feature allows to filter high frequency vibrations that could go through the coil springs, providing to the 10 AMC Antiseismic anti-vibration mount higher degree of vibration isolation.

The AMC-MECANOCAUCHO 10 AMC antiseismic anti vibration mounts are manufactured in several types of springs to suit load from 300 to 8000Kg load per mount.

The metal parts are epoxy coated in order to withstand to arduous corrosive environments.

Applications

The AMC-MECANOCAUCHO® 10 AMC antiseismic mounts are used on stationary applications where disturbing frequency is low and a high vibration isolation and lateral stability is required, for example generator sets, HVAC equipment, pumps or ventilators.

 

Advantages

In addition to its resistance, these pieces offer the following advantages:

  • TRANSPORT SAFETY: Vibrabsorber seismic brackets feature a locking device, so that the brackets are locked during the transport of the machine.
  • NOISE ISOLATION STRUCTURE: The microcellular polyurethane Sylomer® pad these supports have under their base insulates the mid and high frequencies that are transmitted by the spring.
 

Elastical Properties

CURVE

Drawings

10 AMC Anti-seismic

10 AMC ANTI-SEISMIC DRAWING

1 AMC Anti-seismic + Sylomer

10 AMC ANTI-SEISMIC + SYLOMER DRAWING