Buffer, Diabolo – Type D

Rigid buffers used as end stops or to limit the stroke of moving parts give rise to high impact stresses to structures often causing visible deterioration. This is normally accompanied by unacceptably high noise levels to the human ear, particularly when these impacts are repeated periodically. Rubber buffers eliminate these drawbacks considerably, as they dampen sound and absorb energy . The simple buffer has a flat surface of rubber and therefore responds immediately to impact, without over-extending the stroke of the moving part. The progressive buffer has a conical form and therefore makes contact on a progressive basis, increased deflection with increased load. This action is much more gradual and is particularly good for a considerable absorption of energy, without causing instant stress.

UNSPSC Codes: 23153130

Category:

Description

Buffer Diabolo type D

Male threaded mount, included.

 diabolo-buffers-type-a-drawing

Type

A(mm)

B(mm)

C(mm)

H(mm)

Weight(kg)

Static Load max. daN

Dynamic Load max. daN

Dynamic Deflection mm

Static Deflection mm

Code

F.3

30

23

M-8

20

0,032

40

90

9

5

114001

F.7

44

42

M-8

20

0,07

50

100

10

6

114002

F.1

60

44

M-8

20

0,116

40

100

10

4

114003

F.2

60

44

M-8

20

0,127

75

200

12

5,5

114004

F.4

60

60

M-10

25

0,213

150

350

15

8

114005

F.8

60

31

M-10

25

0,135

100

275

14

7

114006

F.5

80

65

M-14

35

0,508

300

800

16

9,5

114007

F.6

95

70

M-16

45

0,724

400

1000

18

9,5

114008

TECHNICAL CHARACTERISTICS

The elastic buffers are made with a compound of rubber which permits major deformations with notable absorption of energy. They can be made with high-damping rubber to order. The absorption of energy is performed thus, irreversibly and opposes the rebound phenomenon.

APPLICATIONS

As buffers: In any case for limiting a flexible element.

  • End of stroke of spring or damper.
  • End of stroke of cranes and hoists.
  • Setting of fragile material in packing

OPERATION AND ASSEMBLY

DIABOLO BUFFERS TYPE D

The elastic buffers can be used in these two possibilities: • As ActuAl buffers: The impact takes place as an end of stroke, taking into account the maximum deflection the stop may give. • As elastic mounts. When installed as elastic mounts, the buffers may be screwed to the base of the machine so that its flat surface rests directly on the floor or ground.

ADVANTAGES

  • Easy to install in all cases.
  • Great efficacy when used as mount or as buffer.
  • Possibility of moving the machines, which are not secured to the floor or ground, or of moving the buffers to different points where ends of stroke may be made.

Data Sheet